Accessories for Small Punch machines · EN 10371
PT 8
Blanking a Ø8 mm test piece from sheet — fast and accurate.
A tool for blanking Small Punch test pieces from flat metallic material to EN 10371. The blanked test piece is then ground to its final thickness, for example with the GE 76 tool.
Where it sits in the test piece preparation chain
Technical parameters
A press with a minimum thrust of 3,000 N is required.
- Blanked test piece diameter
- Ø8 mm
- Maximum material thickness
- 0.8 mm
- Maximum material width
- 32 mm (unlimited length)
- Press required
- minimum thrust 3,000 N
- Punch and die
- exchangeable, quick to swap
- Tool dimensions
- Ø60 × 130 mm
- Weight
- 1,350 g
- Standard
- EN 10371
What is worth knowing
01
You need a press
A minimum thrust of 3,000 N at a material thickness of 0.8 mm. Without a press the tool cannot be used.
02
Both punch and die can be replaced
Worn parts are quick to swap, which makes the tool last considerably longer.
03
GE 76 takes it from here
The blanked test piece still has to be ground to its final thickness of 0.5 ± 0.005 mm.
04
Long service life
Made from quality materials and simple to operate.
The tool in practice
Preparing test pieces for your own machine?
PT 8 and GE 76 follow on from each other and are supplied with the SPC range and with TTS 190. Tell us which materials and which machine you work with — we will recommend a set.
Materials
Product leaflet
A leaflet with more information about the product. This is only available upon request.
Request